2sc5053 transistors rev.d 1/2 medium power transistor (50v, 1a) 2sc5053 z features 1) low saturation voltage, typically v ce(sat) = 0.12v at i c / i b = 500ma / 50ma 2) p c =2w (on 40 40 0.7mm ceramic board) 3) complements the 2sa1900 z dimensions (unit : mm) mpt3 (1)base (2)collector (3)emitter z absolute maximum ratings (ta=25 c) parameter collector-base voltage collector-emitter voltage emitter- base voltage collector power dissipation collector current collector power dissipation storage temperature symbol limits 60 50 5 1 0.5 2 150 ? 55 to + 150 unit v v v a 2 a (pulse) w w ? 1 ? 2 c c ? 1 single pulse pw=100ms ? 2 when mounted on a 40 40 0.7mm seramic board. v cbo v ceo v ebo i c p c t j t stg + + z electrical characteristics (ta=25 c) parameter symbol min. typ. max. unit conditions collector-base breakdown voltage collector-emitter breakdown voltage emitter-base breakdown voltage collector cutoff current emitter cutoff current collector-emitter saturation voltage dc current transfer ratio transition frequency output capacitance cob 60 50 5 ? ? ? 120 ? ? ? ? ? ? ? ? ? 150 15 ? ? ? 0.1 0.1 0.4 390 ? ? v v v a a v ? mhz pf i c = 50 a i c = 1ma i e = 50 a v cb = 40v v eb = 4v i c /i b = 500ma/50ma v ce /i c = 3v/0.5a v ce = 5v , i e = ? 50ma , f=100mhz v cb = 10v , i e = 0a , f=1mhz bv cbo bv ceo bv ebo i cbo i ebo h fe f t v ce(sat) z packaging specifications and h fe type package h fe code basic ordering unit (pleces) 2sc5053 mpt3 qr t100 marking cg 1000 ? denotes h fe ?
2sc5053 transistors rev.d 2/2 z electric characteristics curves fig.1 grounded emitter output characteristics collector to emitter voltage : v ce (v) collector current : i c (ma) 12345 0 800 900 1000 600 700 300 400 500 200 0 100 10ma 9ma 8ma 7ma 6ma 5ma 4ma 3ma ib=1ma 2ma fig.2 dc current gain vs. collector current collector current : i c (a) dc current gain : h fe 0.01 0.02 0.05 0.1 0.2 0.5 0.001 0.002 0.005 1 2 10 20 50 100 200 500 1000 5 1 2 v ce =3v ta=25 c fig.3 collector-emitter saturation voltage vs.collector current collector current : i c (a) collector saturation voltage : v ce(sat) (mv) 100m 1m 10m 1 2 10 20 50 100 200 500 1000 5 1 2 ta=25 c i c /i b =10 1000 transition frequency : f t (mhz) ? 1 ? 0.1 ? 10m ? 1m 100 200 500 10 20 50 1 2 5 emitter current : i e (a ) fig.4 gain bandwith product vs. emitter current ta = 25 c v ce = 5v ta=25 c f=1mhz i e =0a fig.5 collector output capacitance vs. collector-base voltage collector to base voltage : v cb (v) collector output capacitance : c ob( (pf) 0.1 0.2 0.5 1 20 2510 10 20 50 100 200 5 1 2 fig.6 safe operating area collector to emitter voltage : i ce (v) collector current : i c (a) 12 51020 50 0.2 0.5 100 5 1 2 0.1 0.2 0.5 0.05 0.01 0.02 ta=25 c ? single nonrepeatitive pulse 10ms 100ms dc i c max. (pulse ) ?
notes no technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of rohm co.,ltd. the contents described herein are subject to change without notice. the specifications for the product described in this document are for reference only. upon actual use, therefore, please request that specifications to be separately delivered. application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. rohm co.,ltd. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by rohm co., ltd. is granted to any such buyer. products listed in this document are no antiradiation design. appendix1-rev2.0 thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact your nearest sales office. rohm customer support system the americas / europe / asia / japan contact us : webmaster@ rohm.co. jp www.rohm.com copyright ? 2008 rohm co.,ltd. the products listed in this document are designed to be used with ordinary electronic equipment or de vices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. it is our top priority to supply products with the utmost quality and reliability. however, there is always a chance of failure due to unexpected factors. therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. rohm cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the notes specified in this catalog. 21 saiin mizosaki- cho, ukyo-ku, kyoto 615-8585, japan tel : +81-75-311-2121 fax : +81-75-315-0172 appendix
|
